My husband has teased that if you sit too long in our house you might get painted. Soon the same may apply to being slipcovered.
I have a closet where I stash Christmas gifts, off-season decorating accessories and beneath all the really good junk was this carved table that matches the love seat I just slipcovered.
The challenge was going to be covering the table’s carved and curvy top. The solution I found was a piece of foam core board to place on top of the table. I turn the table over and traced around the edge then went back and eased the curved indentions into an oval shape. The foam core board also creates and even surface on the top since the mirror is lower than the carved edge.
Using a utility knife I cut around the outline until I had the desired shape.
I used the oval foam board as a pattern to cut out the fabric for the top then started pinning the top to the skirt. I had just enough of the 8 oz. drop cloth left over from the love seat to cover the table.
The skirt is two rectangle pieces of fabric with a seam on each side of the table. I barely had enough fabric for the skirt but did managed to squeeze a small pleat in the front and back. After sewing the seams I trimmed the excess fabric with pinking shears. All that was left was the hemming the skirt.
With a little slipcover magic, I turned two unused sentimental pieces of furniture into a functional seating area. This may be my new reading spot and a place to stack my books.
Thank you so much for stopping by!
Linked up with: Slightly Coastal
©2015 Slipcover Magic was first published on Thistle Key Lane
Leave A Comment